Ppp And Mp Configuration Commands; Ppp Configuration Commands; Ip Address Ppp-Negotiate; Ip Pool - HP MSR series Command Reference Manual

PPP and MP configuration commands

PPP configuration commands

ip address ppp-negotiate

Use ip address ppp-negotiate to enable IP address negotiation on the local interface, so that the local
interface can accept the IP address allocated by the peer end.
Use undo ip address ppp-negotiate to disable IP address negotiation.
Syntax
ip address ppp-negotiate
undo ip address ppp-negotiate
Default
IP address negotiation is disabled.
Views
Interface view
Default command level
2: System level
Examples
# Enable IP address negotiation on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ip address ppp-negotiate
Related commands
remote address
•
ppp ipcp remote-address forced
•

ip pool

Use ip pool to configure an address pool for assigning IP addresses to PPP users.
Use undo ip pool to remove an address pool.
Syntax
ip pool pool-number low-ip-address [ high-ip-address ]
undo ip pool pool-number
Default
No IP address pool is configured for PPP users.
2