Fefd-Global Interval; Fefd-Global - Dell C9000 Series Reference Manual

fefd-global interval

Configure an interval between FEFD control packets.
C9000 Series
Syntax
fefd-global interval seconds
To return to the default value, use the no fefd-global interval command.
Parameters
seconds
Defaults 15 seconds
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Related
Commands

fefd-global

Enable FEFD globally on the system.
C9000 Series
Syntax
fefd-global [interval seconds][mode {normal | aggressive}]
Enter a number as the time between FEFD control packets. The
range is from 3 to 300 seconds. The default is 15 seconds.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
• fefd — enables far-end failure detection.
• fefd-global — enables FEFD globally on the system.
Layer 2 1345