Pnni Format; Addprfx - Cisco MGX 8850 Command Reference Manual

addprfx

addprfx
Add Prefix—create an address prefix for a UNI or IISP
The addprfx command lets you add an ATM prefix for ILMI to a UNI or IISP.
Cards on Which This Command Runs
Syntax
addprfx <portid> <atm-prefix>
Syntax Description
portid
atm-prefix
Related Commands
dspprfx, delprfx
Attributes
Log: log
Examples
Add prefix47.0091.8100.0000.0000.0ca7.9e01 to PNNI physical port 3:1.1:1. Display ATM address
prefixes for this port. Only the one just added exists.
M8850_NY.7.PXM.a > addprfx 3:1.1:1 47.0091.8100.0000.0000.0ca7.9e01
M8850_NY.7.PXM.a > dspprfx 3:1.1:1
ILMI Configured Port Prefix(es):
47.0091.8100.0000.0000.0ca7.9e01
M8850_NY.7.PXM.a >
Cisco MGX 8850 Routing Switch Command Reference
4-4
The portid is the PNNI physical port. The format is
[shelf.]slot[:subslot].port[:subport]. See also
A 13-byte ATM prefix (26 hexadecimal characters).
State: active
PNNI Format, page 4-2
Privilege: GROUP1
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 4 ILMI Commands