cnfpasswd
cnfpasswd
Configure Password
Change your own password. After you enter the cnfpasswd command without parameters, the system
prompts you to enter the new password then prompts you to re-enter it.
Note
The default password is for a user-account is newuser.
Cards on Which This Command Runs
PXM45
Syntax
cnfpasswd
<password>
Syntax Description
password
Related Commands
adduser, dspusers, cnfuser
Attributes
Log: no log
Change your password. After you enter the command, it prompts you once to enter a new password then
prompts you to re-enter it.
pinnacle.8.PXM.a > cnfpasswd
Enter password:
Re-enter password:
Cisco MGX 8850 Routing Switch Command Reference
2-30
Your new password.
State: active
Chapter 2
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Shelf Management Commands