Cisco MGX 8850 Command Reference Manual page 468

cnfsigdiag
-servctgy
-status
Related Commands
delsigdiag, dspsigdiag, dspsigstats, clrsigstats
Attributes
Log: log
Cisco MGX 8850 Routing Switch Command Reference
6-50
Filters ATM signaling call failures by service category (service type): valid entries
are: all (for all service types), cbr, rtvbr, nrtvbr, ubr, or abr.
Default: all
The status of the entry for the signaling diagnostics filter table. Type active to begin
filtering failed connections or inactive to stop filtering failed connections. The
inactive specification causes the node to delete all the records associated with the
filter entry.
Default: inactive
State: active Privilege: ANYUSER
Chapter 6 Logical Node, Port, and Signaling Commands
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001