Clrpncon - Cisco MGX 8850 Command Reference Manual

Chapter 7 SPVC and SVC Commands

clrpncon

Clear Connection
Delete a call—either all SVCs or a specific SVC on a port. (If you attempt to clear an SPVC with this
command, the switch deletes the connection but then automatically attempts to reroute it. For an SPVC
or SPVP, use delcon so you can delete the endpoints.)
Cards on Which This Command Runs
PXM45
Syntax
clrpncon <portid>
{all | vpi}
[vci]
Syntax Description
portid
all | vpi
vci
Related Commands
dsppncon, dspncons
Attributes
Log: log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
Specifies either all VPIs on the port or a specific VPI.
Possible values are either the string "all" or a VPI in the range 0–4095.
VCI of a specific SVC to clear. If you are clearing a virtual path connection
(VPC), do not enter a VCI.
State: active
PNNI Format, page
Privilege: SUPER_GP
Cisco MGX 8850 Routing Switch Command Reference
clrpncon
7-4.
7-15