Dnilmi - Cisco MGX 8850 Command Reference Manual

dnilmi

dnilmi
Down ILMI
The dnilmi command lets you de-activate (down) ILMI on a logical port so you can modify a
configuration, troubleshoot, or run certain commands that require ILMI to be inoperative.
Cards on Which This Command Runs
AXSM
Syntax
dnilmi <ifNum> <partId>
Syntax Description
ifNum
partId
Related Commands
dspilmi, dspilmis, upilmi
Attributes
Log: log
Cisco MGX 8850 Routing Switch Command Reference
4-16
Logical port number. On an AXSM, the range is 1–60.
The range for partition identifier is 1–5.
State: active, standby Privilege: SERVICE_GP
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 4 ILMI Commands