Saveallcnf - Cisco MGX 8850 Command Reference Manual

saveallcnf

saveallcnf
Save All Configurations—save all configuration files to the hard drive.
The saveallcnf command saves all configurations to a zipped file in the CNF directory on the hard drive.
This command takes significant time, so a warning message prompts you for confirmation before the
system performs the task. Upon completion, the system displays the name of the saved configuration
file. The system stores up to two zipped configuration files. If you want to save more than two
configurations, use FTP to transfer the files to another device.
To restore the system configuration, use restoreallcnf.
You should execute saveallcnf only if no connection provisioning is occurring.
Note
Cards on Which This Command Runs
PXM45
Syntax
saveallcnf
Related Commands
restoreallcnf
Attributes
Log: log
Cisco MGX 8850 Routing Switch Command Reference
2-88
State: active, init Privilege: SERVICE_GP
Chapter 2 Shelf Management Commands
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001