Dsppnportidmaps - Cisco MGX 8850 Command Reference Manual

Chapter 6 Logical Node, Port, and Signaling Commands

dsppnportidmaps

Display Port ID Maps—display physical port ID to logical port ID mapping.
The dsppnportidmaps command lets you display the mapping of physical port identifiers (portIDs) to
logical port identifiers. The purpose of having logical port IDs is that some command require the logical
port ID. The displayed information consists of:
•
•
•
•
Cards on Which This Command Runs
PXM45
Syntax
dsppnportidmaps
Syntax Description
This command takes no parameters.
Related Commands
none
Attributes
Log: nolog State: active, standby
Example
Display the mapping of physical port IDs to the logical IDs on the switch. Note that the switch has not
generated a logical ID for port 2:2.2:1 because the port is still in the provisioning state.
8850_NY.7.PXM.a > dsppnportidmaps
Port Id
7.35
7.36
7.37
7.38
1:2.1:1
2:2.2:1
3:1.1:1
8850_NY.7.PXM.a >
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Physical port ID in the format slot[:subslot].port[:subport]
Logical port ID in decimal format
Logical port ID in hexadecimal format
Operational state of the port
Logical ID (Dec)
17251107
17251108
17251109
17251110
16848897
n/a
16979969
Privilege: SUPER_GP
Logical ID (Hex) OperStatus
1073b23 up
1073b24 up
1073b25 up
1073b26 up
1011801 up
n/a provisioning
1031801 up
Cisco MGX 8850 Routing Switch Command Reference
dsppnportidmaps
6-91