Dsppnni-Scope-Map - Cisco MGX 8850 Command Reference Manual

dsppnni-scope-map

dsppnni-scope-map
Display Scope Map
The dsppnni-scope-map command displays the table that maps UNI 4.0 scope to PNNI hierarchy level.
Note The scope map table requires UNI 4.0 support, so this command is not useful in the current release.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-scope-map
Objects Displayed:
Displays the entire scope map table.
Related Commands
cnfpnni-scope-map
Attributes
Log: nolog
Example
This command is not supported by the current release.
Cisco MGX 8850 Routing Switch Command Reference
5-112
— display the PNNI scope map table.
State: active Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5 PNNI Commands