Cnfpnni-Intf - Cisco MGX 8850 Command Reference Manual

cnfpnni-intf

Syntax Description
If you enter -awall to specify an AW, it overrides the AW for all individual service types.
t
portid
-aggregationToken
-awcbr
-awrtvbr
-awnrtvbr
-awabr
-awubr
-awall
Cisco MGX 8850 Routing Switch Command Reference
5-22
The PNNI physical port ID. The portid has the format
[shelf.]slot[:subslot].port[:subport]. For more details about portid, see
Format.
Default: none
Specify a 32-bit number for logical link aggregation between a peer group
leader and the lowest level.
Range: 0–2147483648
Default: 0
The current release does not support multiple PNNI levels, so this parameter
has no meaning.
Specify the administrative weight for constant bit rate (CBR) on this interface.
Range: 0–4194304
Default: 5040
Specify the administrative weight for real-time variable bit rate (rt-VBR) on
this interface.
Range: 0–4194304
Default: 5040
Specify the administrative weight for non-real-time variable bit rate (nrt-VBR)
on this interface.
Range: 0–4194304
Default: 5040
Specify the administrative weight for available bit rate (ABR) on this
interface.
Range: 0–4194304
Default: 5040
Specify the administrative weight for unspecified bit rate (UBR) on this
interface. UBR connections can include SVC ping connections.
Range: 0–4194304
Default: 5040
Specify the administrative weight for all service types on this interface. If you
use -awall, this aw becomes the AW for every service type on this port.
Range: 0–4194304
Default: 5040
Chapter 5
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
PNNI Commands
PNNI