Cnfrteoptthld - Cisco MGX 8850 Command Reference Manual

Chapter 8 Network Optimization Commands

cnfrteoptthld

Configure Route Optimization Threshold
Configure a threshold the system uses to decide whether one route is a sufficient improvement to warrant
re-routing. The criterion for selecting a new route is a threshold in the form of the percent of difference
in route cost.
The default for route optimization is a 30% reduction of the cost of a route. Using this mechanism, the
PXM45 selects a given route if it costs 30% less than the cost of the current route. With cnfrteoptthld,
you can change the percentage of routing cost-improvement.
Syntax
cnfrteoptthld <percent>
Syntax Description
percent
Cards on Which Command Executes
PXM45
Related Commands
cnfrteopt, optrte, dsprteoptcnf, dsprteoptstat
Attributes
Log: log
Example
Change the re-routing threshold to a 20% reduction in the route cost.
pinnacle.7.PXM> cnfrteoptthld 20
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The percent of reduction in routing cost that triggers re-routing. The range is 5–100.
The default is 30.
State: active Privilege: GROUP1
Cisco MGX 8850 Routing Switch Command Reference
cnfrteoptthld
8-11