Delpnni-Summary-Addr - Cisco MGX 8850 Command Reference Manual

delpnni-summary-addr

delpnni-summary-addr
Delete PNNI Summary Address
The delpnni-summary-addr command deletes a PNNI summary address for a PNNI node.
Cards on Which This Command Runs
PXM45
Syntax
delpnni-summary-addr <node-index> <address-prefix> <prefix-length>
Syntax Description
node-index
address-prefix
prefix-length
Related Commands
addpnni-summary-addr, dsppnni-summary-addr
Attributes
Log: log
Example
Delete a summary address, as follows:
•
•
•
If necessary, use dsppnni-summary-addr to confirm the deletion.
SanJose.7.PXM.a > delpnni-summary-addr 1 47.0091.8100.0000.0030.9409.f1f1 104
SanJose.7.PXM.a >
Cisco MGX 8850 Routing Switch Command Reference
5-52
— delete a PNNI summary address from the node.
In the current release, the only supported value for node-index 1. The node index
indicates the relative level of the logical node within a multi-peer group on the
switch. The range is 1–10, and the lowest level is 1.
Range: 1–10
Default: 1
The PNNI summary address.
Default: none
The length of the address-prefix in bits is less than or equal to 152. In the current
release, the zero-length PNNI summary address is not supported.
Default: none
State: active
The node index is 1.
The node address prefix is 47.0091.8100.0000.0030.9409.f1f1.
The length of the address prefix is 104 bits.
Privilege: SUPER_GP
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5 PNNI Commands