Dspcons-Dbg - Cisco MGX 8850 Command Reference Manual

dspcons-dbg

dspcons-dbg
Display Connections-Debug—shows whether the SPVC log is enabled or disabled.
The dspcons-dbg command shows whether the SPVC log is enabled. The dbgcon command lets you
enable or disable this log.
Cards on Which This Command Runs
PXM45
Syntax
dspcons-dbg
Syntax Description
This command takes no parameters.
Related Commands
dbgcon
Attributes
Log: no log
Examples
Determine whether SPVC logging is enabled. The output shows that the log is disabled.
MGX8850.8.PXM.a > dspcons-dbg
Global SPVC Event Log Status: Disable
Cisco MGX 8850 Routing Switch Command Reference
9-94
State: active, standby Privilege: ANYUSER
Chapter 9 Troubleshooting Commands
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001