Delport - Cisco MGX 8850 Command Reference Manual

delport

delport
Delete Port
Remove a logical port from a service module. You must delete all connections and resource partitions
on the port before you can delete it.
Cards on Which This Command Runs
AXSM
Syntax
delport <ifNum>
Syntax Description
ifNum
Related Commands
addport, cnfport, dspport, dspports
Attributes
Log: log
Cisco MGX 8850 Routing Switch Command Reference
3-42
A logical port (interface) number. Only one logical port is allowed if the line operates
as a UNI or NNI. For the virtual network to network interface (VNNI), multiple ports
can exist on a line. For AXSM, the range 1–60.
State: active
Chapter 3 Equipment and Resource Provisioning
Privilege: GROUP1
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001