Dspdisk - Cisco MGX 8850 Command Reference Manual

Chapter 2 Shelf Management Commands

dspdisk

Display Disk
Display utilization for all partitions on the hard disk. The display shows the allocated space and the free
space. A likely application of dspdisk is a routine check of disk utilization by running a script that
includes this command.
The capacity of the disk is very large relative to typical usage and therefore does not present potential
Note
restrictions. The output shows the allocated space rather than the physical capacity of the drive.
Cards on Which This Command Runs
PXM45
Syntax
dspdisk
Syntax Description
This command takes no parameters.
Related Commands
cd
Attributes
Log: no log
Example
Display the utilization for the default partition C.
orpswp3.2.PXM.a > dspdisk
==========================================================
Partition C: Allocated Size:
Partition D: Allocated Size:
Partition E: Allocated Size:
Partition F: Allocated Size:
==========================================================
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
State: active, standby Privilege: ANYUSER
800 MB Free Space:
600 MB Free Space:
100 MB Free Space:
800 MB Free Space:
574 MB
564 MB
99 MB
799 MB
Cisco MGX 8850 Routing Switch Command Reference
dspdisk
2-55