Dspilmiaddr - Cisco MGX 8850 Command Reference Manual

dspilmiaddr

dspilmiaddr
Display ILMI Address—displays ILMI registered port addresses.
The dspilmiaddr command lets you display the ATM addresses registered by the peer via the ILMI
address registration mechanism.
Cards on Which This Command Runs
PXM45
Syntax
dspilmiaddr <portid>
Syntax Description
portid
Related Commands
cnfilmienable, cnfilmiproto, dsppnilmi, pntraceilmi
Attributes
Log: nolog
Examples
Display the ILMI address on port 3:2.2:4.
8850_NY.7.PXM.a > dspilmiaddr 3:2.2:4
INFO:
Cisco MGX 8850 Routing Switch Command Reference
4-18
The portid is the PNNI physical port. The format is
[shelf.]slot[:subslot].port[:subport]. See also
State: active, standby
No ilmi address registered
PNNI Format, page
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 4 ILMI Commands
4-2.