Clrlog - Cisco MGX 8850 Command Reference Manual

Chapter 9 Troubleshooting Commands

clrlog

Clear Log
Use the clrlog command to clear either a specific log file or all log files. The log resumes accumulating
event messages after the command executes.
Cards on Which This Command Runs
PXM45
Syntax
clrlog [-log <log>]
Syntax Description
-log
Related Commands
dsplog, dsplogs
Attributes
Log: log
Example
Clear all event log files on the PXM45 card.
wilco.7.PXM.a > clrlog
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Specifies the type of log file (log) to clear. See dsplog for a list of the types
of logs files.
State: active, standby Privilege: SUPER_GP
Cisco MGX 8850 Routing Switch Command Reference
clrlog
9-21