Cnftmzn - Cisco MGX 8850 Command Reference Manual

Chapter 2 Shelf Management Commands

cnftmzn

Configure Time Zone
Configures the time zone in the Western Hemisphere for the switch. To configure a time zone outside
the four standard time zones of the Western Hemisphere, enter the GMT argument, then execute
cnftmzngmt to specify an offset in hours from Greenwich Mean Time.
The system returns no messages unless an error occurs. To see the time zone, execute dspdate.
Cards on Which This Command Runs
PXM45
Syntax
cnftmzn <timezone>
Syntax Description
timezone
Related Commands
cnftime, cnfdate, cnftmzngmt, dspdate
Attributes
Log: log
Example
Configure the time zone in the node to U.S. Pacific Standard Time.
excel.1.3.PXM.a > cnftmzn PST
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The possible time zones requires all uppercase characters.
GMT, Greenwich Mean Time
EST, Eastern Standard Time
CST, Central Standard Time
MST, Mountain Standard Time
PST, Pacific Standard Time
EDT, Eastern Daylight Time
CDT, Central Daylight Time
MDT, Mountain Daylight Time
PDT, Pacific Daylight Time
State: active Privilege: SUPER_GP
Cisco MGX 8850 Routing Switch Command Reference
cnftmzn
2-35