Dspapslns - Cisco MGX 8850 Command Reference Manual

Chapter 3 Equipment and Resource Provisioning

dspapslns

Display APS Lines
Displays all working and protection APS lines on a card. This command can be executed only on an
active card. After identifying a particular APS line, you can use dspapsln to view details about the line.
See the addapsln command for an explanation of Automatic Protection Switching (APS).
Cards on Which This Command Runs
AXSM
Syntax
dspapslns
Syntax Description
This command takes no parameters.
Related Commands
addapsln, cnfapsln, delapsln, dspapsln, switchapsln, dspapsbkplane, clrbecnt, dspbecnt
Attributes
Log: no log
Example
Display all lines with an APS configuration on the current AXSM.
MGX8850.3.AXSM.a > dspapslns
Working Prot.
Index
------- -----
3.1.1
3.1.7
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
State: active, standby
Conf Oper
Index Arch Arch
---- -----
3.1.2 1+1 1+1
3.1.8 1+1 1+1
Privilege: ANYUSER
Active SFBer SDBer WTR
Line 10^-n 10^-n (min)
------ ----- ----- ----- ---- --- ----------
working 3 5
working 3 5
Cisco MGX 8850 Routing Switch Command Reference
Revt Dir LastUser
SwitchReq
5 No uni No Request
5 No uni No Request
dspapslns
3-51