Cnfenhiisp - Cisco MGX 8850 Command Reference Manual

cnfenhiisp

cnfenhiisp
Configure Enhanced IISP—enable or disable enhanced IISP features.
The cnfenhiisp command enables or disables the enhanced IISP feature on the port. This command
applies to only IISP ports. When you change the operational state of enhanced IISP, the change does not
affect existing calls.
The items that enhanced IISP include are:
•
•
•
•
Cards on Which This Command Runs
PXM45
Syntax
cnfenhiisp <portid> {yes | no}
Syntax Description
portid
yes | no
Related Commands
dspenhiisp
Attributes
Log: log
Examples
Enable enhanced IISP on port 11:2.1:1.
Geneva.7.PXM.a > cnfenhiisp 11:2.1:1 yes
Cisco MGX 8850 Routing Switch Command Reference
6-22
Generic identifier transport (GIT)
Virtual path service over the IISP
Added support or nrt-VBR and rt-VBR
Transport of frame discard specification
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page
Enter "yes" to enable enhanced IISP or "no" to disable enhanced IISP.
Default = no
State: active
Chapter 6 Logical Node, Port, and Signaling Commands
6-4.
Privilege: SUPER_GP
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001