Dspsigdiag - Cisco MGX 8850 Command Reference Manual

dspsigdiag

dspsigdiag
Display Signaling Diagnostic
Displays the configured filter entries and the collection call records for the ATM signaling diagnostics.
Cards on Which This Command Runs
PXM45
Syntax
dspsigdiag {filter | rec | status}
[index]
Syntax Description
filter
rec
status
index
Related Commands
cnfsigdiag, delsigdiag, dspsigstats, clrsigstats
Attributes
Log: nolog
Cisco MGX 8850 Routing Switch Command Reference
6-104
Display the information in the filter table.
Display the call failure records.
Display global diagnostics status.
This field can be used with the option filter or rec. If used with filter, the configuration of
the specified indexed filter entry display. If you don't specify an index, configuration of
all filter entries display. If this field is used with rec, then all of the records filtered for the
specified indexed filter entry display.
State: active, standby
Chapter 6 Logical Node, Port, and Signaling Commands
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001