Clrerrhist - Cisco MGX 8850 Command Reference Manual

clrerrhist

clrerrhist
Clear Error History—clear the history of errors for a card.
The clrerrhist commands resets the contents of the error history file for a particular card. Although you
execute this command on the CLI of the PXM45, you can specify the error history of any slot. For a list
of the information fields in an error history file, see the description of dsperrhist.
Cards on Which This Command Runs
PXM45
Syntax
clrerrhist [slot]
Syntax Description
slot
Related Commands
dsperrhist
Attributes
Log: no log
Example
Clear the error history for the current PXM45. The system returns a message indicating whether the
operation succeeded.
pop20one.7.PXM.a > clrerrhist 7
Log of Errors and Failures for slot# 7 is cleared.
Cisco MGX 8850 Routing Switch Command Reference
9-18
Number of the slot—any slot in the switch. If you do not enter a slot
number, the system clears the error history on the current PXM45.
State: active, standby, init
Chapter 9 Troubleshooting Commands
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001