Dspprfx - Cisco MGX 8850 Command Reference Manual

Chapter 4 ILMI Commands

dspprfx

Display Prefix
Display the ILMI address prefixes for a port.
Cards on Which This Command Runs
PXM45
Syntax
dspprfx <portid>
Syntax Description
portid
Related Commands
addprfx, delprfx
Attributes
Log: nolog
Examples
Display all ILMI address prefixes for port 4:1.1:11.
SanJose.7.PXM.a > dspprfx 4:1.1:11
ILMI Configured Port Prefix(es):
47.0091.8100.0000.0000.0ca7.9e01
88.8888.8888.0000.0000.0000.0000
SanJose.7.PXM.a >
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport]. See
also PNNI Format, page 4-2.
State: active, standby Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dspprfx
4-23