Dsperrhist - Cisco MGX 8850 Command Reference Manual

dsperrhist

dsperrhist
Display Error History—displays a list of errors for a card slot.
The display consists of the following for each record in the history file:
•
•
•
•
The maximum number of entries in the history for a slot is 10. When the 11th error is logged, the switch
deletes the oldest entry. Alternatively, you can clear the error history by executing clrerrhist.
If no entries exist in the history, the system returns the message, Nothing is logged.
Cards on Which This Command Runs
PXM45
Syntax
dsperrhist [slot]
Syntax Description
slot
Related Commands
clrerrhist
Attributes
Log: no log
Examples
Display the error history for the current PXM45. This PXM45 resides in slot 8.
jdlenoir.8.PXM.a > dsperrhist
Log of Errors and Failures (Slot 8):
Entry#--Event#---EventName-------------------------------TimeStamp-----------
General:
01
02
03
-----------------------------------------------------------------------------
Cisco MGX 8850 Routing Switch Command Reference
9-108
A number for the entry in the error history file
An event number in hexadecimal format
An event name—a few words that describe the error (such as the severity or affected area)
A time stamp
Number of the slot—any slot in the switch. If you do not enter a slot number, the
system displays the error history on the active PXM45.
State: active, standby, init
0x5006 CBC(Slave) Non-Fatal Minor
0x5006 CBC(Slave) Non-Fatal Minor
0x5006 CBC(Slave) Non-Fatal Minor
Chapter 9 Troubleshooting Commands
Privilege: ANYUSER
11/21/2000-17:55:49
11/21/2000-17:57:36
11/21/2000-18:22:47
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001