Dspabrtparmdft - Cisco MGX 8850 Command Reference Manual

Chapter 7 SPVC and SVC Commands

dspabrtparmdft

Display ABR Parameter Defaults
Displays the default ABR parameters for a logical port under PNNI.
Cards on Which This Command Runs
PXM45
Syntax
dspabrtparmdft <portid>
Syntax Description
portid has the format [shelf.]slot[:subslot].port[:subport].
Related Commands
addcon, cnfabr, cnfabrtparmdft
Attributes
Log: no log
Example
Display the default ABR parameters on portid 1:1.1:1.
Default ABR Traffic Parameters For: 1:1.1:1
-----------------------------------
RIF: 7 (= 1/512)
RDF: 4 (= 1/4096)
TBE: 1048320 (Cells)
NRM: 5 (= 32 Cells)
TRM: 8 (= 100 misc.)
ADTF: 50 (= 0.50 Sec)
CDF: 7 (= 1/2)
FSD: 0 (microSec)
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
State: active, standby Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dspabrtparmdft
7-35