Dsppnni-Neighbor - Cisco MGX 8850 Command Reference Manual

Chapter 5 PNNI Commands
Neighbor state
Port count
SVC RCC index
RX DS pkts
TX DS pkts
RX PTSP pkts
TX PTSP pkts
RX PTSE req pkts
TX PTSE req pkts
RX PTSE ack pkts
TX PTSE ack pkts
Related Commands
None
Attributes
Log: log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
FULL??
The number of ports.
The index for the SVC routing control channel.
The number of received signal packets in the receive direction. The current
release does not support SVCC RCC, so this value is '0.'
The number of transmitted signal packets in the transmit direction.
The number of PNNI topology state packets in the receive direction.
The number of PNNI topology state packets in the transmit direction.
The number of PNNI topology state element (PTSE) request packets in the
receive direction.
The number of transmitted PTSE request packets in the transmit direction.
The number of received PTSE acknowledgment packets in the receive
direction.
The number of transmitted PTSE acknowledgment packets in the transmit
direction.
State: active, standby Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference

dsppnni-neighbor

5-75