Dspfdr - Cisco MGX 8850 Command Reference Manual

dspfdr

dspfdr
Display Feeder
Displays the configuration information for the feeder on the specified port (ifNum). The interface
numbers of active ports are displayed in the dspports command report.
For more detailed information on configuring a feeder, see the Cisco MGX 8850 Switch Software
Configuration Guide, Release 2.
Syntax
dspfdr <ifNum>
Syntax Description
ifNum
Card(s) on Which This Command Executes
AXSM
Related Commands
addfdr, delfdr, dspfdrs
Attributes
Log: no log
Example
MGX8850.1.AXSM.a > dspfdr 4
Feeder Interface Number
Feeder Name
Feeder LAN IP Address
Feeder Network IP Address
Feeder Remote Shelf
Feeder Remote Slot
Feeder Remote Port
Feeder Type
Feeder Model Number
Feeder LMI Configuration
Feeder Lmi Link Status
Feeder Alarms
Cisco MGX 8850 Routing Switch Command Reference
3-72
The interface number of the port on which to display the feeder information. The
interface numbers of active ports are displayed in the dspports command report.
State: active
Chapter 3
Privilege: ANYUSER
: 4
: MGX8850
: 192.0.0.0
: 0.0.0.0
: 1
: 1
: 3
: AXSM
: 8850
: Up
: Up
: Clear
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Equipment and Resource Provisioning