Clrsscopstats - Cisco MGX 8850 Command Reference Manual

clrsscopstats

clrsscopstats
Clear SSCOP Statistics
The clrsscopstats command lets you clear the statistics for the service-specific connection-oriented
protocol (SSCOP). You can specify the statistics for an individual port or all ports on the switch.
Cards on Which This Command Runs
PXM45
Syntax
clrsscopstats [ portid ]
Syntax Description
portid
Related Commands
dspsscopstats
Attributes
Log: log
Example
Clear the SSCOP statistics on port 4:1.1:11.
Geneva.7.PXM.a > clrsscopstats 4:1.1:11
Cisco MGX 8850 Routing Switch Command Reference
6-20
If you do not specify a port, this command clears all SSCOP statistics on the switch. The portid
is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport]. See also
Format, page 6-4.
State: active
Chapter 6 Logical Node, Port, and Signaling Commands
Privilege: SUPER_GP
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
PNNI