Dspintfcongcntr - Cisco MGX 8850 Command Reference Manual

Chapter 6 Logical Node, Port, and Signaling Commands

dspintfcongcntr

Display Interface Congestion Counters
Display the congestion thresholds for a port. This command cannot be used if the interface is in
PROVISIONING state or if the interface ("IF" in the display) is down.
Cards on Which This Command Runs
PXM45
Syntax
dspintfcongcntr <portid>
Syntax Description
portid
Related Commands
dspintfcongth, cnfintfcongth
Attributes
Log: nolog
Examples
Geneva.7.PXM.a > dspintfcongcntr 11:2.2:22
Parameter
============================================================
setupRx
unackstatenq
Parameter
============================================================
vsiqdepth
Geneva.7.PXM.a >
Note: vsiqdepth is the depth of the VSI queue for the slave that serves the interface identified by portid,
and this is displayed as the percentage of VSI communication window size.
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page
State: active, standby
Value
0
0
Value
0
6-4.
Privilege: SUPER_GP
thresh1 thresh2
140 180
40 100
Mild Medium Severe
5 10 20
Cisco MGX 8850 Routing Switch Command Reference
dspintfcongcntr
6-71