Dspxbarstatus - Cisco MGX 8850 Command Reference Manual

Chapter 9 Troubleshooting Commands

dspxbarstatus

Display Crossbar Status
Display status of each slot for a crossbar.
Cards on Which This Command Runs
PXM45
Syntax
dspxbarstatus [
Syntax Description
plane
Related Commands
dspxbar, dspxbaralm, dsperrcnt, dsperrthresh
Attributes
Log: no log
Example
Display the status of switch ASIC 0. The active PXM45 in this example is in slot 7.
MGX8850
MGX8850
Switch CD No: 7
Administrative Status Bitmap: 0xFFFFFFFF
Operational Status Bitmap
Error Status Bitmap:
Slot 1: 0x0
Slot 2: 0x0
Slot 3: 0x0
Slot 4: 0x0
Slot 5: 0x0
Slot 6: 0x0
Slot 7: 0x0
Slot 8: 0x0
Slot 9: 0x0
Slot 10: 0x0
Slot 11: 0x0
Slot 12: 0x0
Slot 13: 0x0
Slot 14: 0x0
Slot 15: 0x0
Slot 16: 0x0
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
plane
]
(Optional.) The number of the switching plane. The default is 0. For the MGX 8850
node, the range is 0–2.
State: active, standby, init
System Rev: 02.00
Switch ASIC No: 0
: 0x0
Privilege: ANYUSER
Jul. 13, 2000 18:26:54 GMT
Node Alarm: UNKNOWN
Cisco MGX 8850 Routing Switch Command Reference
dspxbarstatus
9-141