Dspcds - Cisco MGX 8850 Command Reference Manual

dspcds

dspcds
Display Cards
Displays high-level information for all the cards in the node. For more detailed information about a card,
execute dspcd on the CLI of that card. The information that dspcds provides is the:
•
•
•
•
•
•
•
•
Cards on Which This Command Runs
PXM45
Syntax
dspcds
Related Commands
dspcd, version
Attributes
Log: no log
Cisco MGX 8850 Routing Switch Command Reference
9-70
Revision level of the boot firmware
Revision level of the system software
Date and time of command execution, including GMT offset
Backplane serial number and its hardware revision level
The IP address of the statistics master (a workstation)
Type of card in the front and back slots and the (active/standby) state of each
Alarm status for each card and the shelf itself
Redundancy configuration for each slot
State: active, standby, init
Chapter 9 Troubleshooting Commands
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001