Cisco MGX 8850 Command Reference Manual page 352

dsppnni-dbg
dsppnni-dbg
Display PNNI Debug Flags
The dsppnni-dbg command displays which PNNI debug options are enabled and which are disabled.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-dbg
Display Contents
This section describes the content of the display for each node. The right column shows the label for
each value that appears in the dsppnni-dbg command. The left column maps each value to the
corresponding keyword in the dbgpnni command, and explains the argument function.
Hello
election
nbr
itf
timer
lgn
spt
Cisco MGX 8850 Routing Switch Command Reference
5-58
— display the settings of all PNNI debug flags.
Display the flag that indicates whether the Hello packet debug is enabled.
on: the Hello packet debug is enabled.
off: the Hello packet debug is disabled.
Display the flag that indicates whether the peer group election debug is enabled.
on: the peer group election debug is enabled.
off: the peer group election debug is disabled.
Display the flag that indicates whether the neighbor debug is enabled.
on: the neighbor debug is enabled.
off: the neighbor debug is disabled.
Display the flag that indicates whether the interface debug is enabled.
on: the interface debug is enabled.
off: the interface debug is disabled.
Display the flag that indicates whether the timer debug is enabled.
on: the timer debug is enabled.
off: the timer debug is disabled.
Display the flag that indicates whether the logical node (LGN) debug is enabled.
on: the LGN debug is enabled.
off: the LGN debug is disabled.
Display the flag that indicates whether the logical node SPT debug is enabled.
on: the SPT debug is enabled.
off: the SPT debug is disabled.
Chapter 5
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
PNNI Commands