Dspilmicnt - Cisco MGX 8850 Command Reference Manual

Chapter 4 ILMI Commands

dspilmicnt

Display ILMI Counters
Displays the ILMI counters for a particular resource partition on a particular logical port.
Cards on Which This Command Runs
AXSM
Syntax
dspilmicnt <ifNum> <partId>
Syntax Description
ifNum
partId
Related Commands
cnfilmi, dspilmi, dspilmis, clrilmicnt, dnilmi, upilmi
Attributes
Log: nolog
Examples
Display the ILMI counters for logical port 1/partition ID 1 on the current AXSM card.
M8850_NY.1.AXSM.a > dspilmicnt 1 1
If Number
Partition Id
SNMP Pdu Received
GetRequest Received
GetNext Request Received
SetRequest Received
Cold Start Trap Received
GetResponse Received
GetResponse Transmitted
GetRequest Transmitted
Cold Start Trap Transmitted : 1
VPC Trap Transmitted
VCC Trap Transmitted
Unknown Type Received
ASN1 Pdu Parse Error
No Such Name Error
Pdu Too Big Error
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Logical port number. On an AXSM, the range is 1–60.
The range for partition identifier is 1–5.
State: active, standby
: 1
: 1
: 1219596
: 609802
: 0
: 0
: 0
: 609794
: 609802
: 609794
: 0
: 0
: 0
: 0
: 0
: 0
Privilege: ANYUSER
Cisco MGX 8850 Routing Switch Command Reference
dspilmicnt
4-19