Dspilmis - Cisco MGX 8850 Command Reference Manual

dspilmis

dspilmis
Display ILMI Configurations
The dspilmis command lets you display the configuration of all interim local management interfaces
(ILMIs) on the service module.
Cards on Which This Command Runs
AXSM
Syntax
dspilmis
Related Commands
cnfilmi, dspilmi, dspilmicnt
Attributes
Log: nolog
Examples
Display all ILMIs on the current service module.
pop20two.1.AXSM.a > dspilmis
pop20two.1.AXSM.a >
Cisco MGX 8850 Routing Switch Command Reference
4-20
State: active, standby
Sig. rsrc Ilmi Sig Sig Ilmi
Port Part State Vpi Vci Trap
---- ---- ---- ---- ---- --- ------------
1 2 On 0 16
2 2 Off 0 16
3 2 Off 0 16
Privilege: ANYUSER
S:Keepalive T:conPoll K:conPoll
Interval Interval
---------- ----------
On 1
On 1
On 1
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 4 ILMI Commands
InactiveFactor
5 4
5 4
5 4