Cisco MGX 8850 Command Reference Manual page 495

Chapter 6 Logical Node, Port, and Signaling Commands
vsiqmild
vsiqmedium
vsiqsevere
Related Commands
cnfnodalcongth
Attributes
Log: nolog
Example
Display the current node-level congestion thresholds.
8850_SF.7.PXM.a > dspnodalcongth
Parameter
=================================
setuphi(prov)
setuphi(curr)
statenqlo
statenqhi
connpendinglo
connpendinghi
incompjournalhi
vsiqdepthmild
vsiqdepthmedium
vsiqdepthsevere
8850_SF.7.PXM.a >
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
The VSI Q depth above which the VSI master is mildly congested. This threshold is
represented as a percentage of the VSI master-slave communication window. This
threshold applies to all the interfaces on the node.
Range: 1–175
Default: 5
The VSI Q limit above which the VSI master is congested at a medium level. This
threshold is represented as a percentage of VSI master-slave communication window
size. This threshold applies to all the interfaces on the node.
Range: 1–175
Default: 10
The VSI Q depth above which the VSI master is severely congested; This threshold
is represented as a percentage of VSI master-slave communication window size.This
threshold applies to all the interfaces on the node.
Range: 1–175
Default: 20
State: active, standby Privilege: SUPER_GP
Value Unit
180 cps
180 cps
100 cps
200 cps
400 messages
500 messages
5 cycles
5 multiplier
10 multiplier
20 multiplier
Cisco MGX 8850 Routing Switch Command Reference
dspnodalcongth
6-77