Cisco MGX 8850 Command Reference Manual page 670

dspalm
Example
Display alarms on OC-12 line 1.1. In this example, the components of a SONET line (section, line, and
path) are clear. Also, no instances of loss of cell delineation (LOCD) have occurred.
MGX8850.1.AXSM.a > dspalm -sonet 1.1
Line Number
Section Alarm State
Line Alarm State
Path Alarm State
Section Stat Alarm State: TotalESs,TotalSESs,TotalSEFSs,CurrentESs,CurrentSESss
Line Stat Alarm State
Path Stat Alarm State
LOCD Alarm State
APS
On another node, the same bay.line shows some of the possible errors: loss of signal (LOS), errored
seconds and severely errored seconds, unavailable seconds.
MGX8850.1.AXSM.a > dspalm -sonet 1.1
Line Number
Section Alarm State
Line Alarm State
Path Alarm State
Section Stat Alarm State: CurrentESs,CurrentSESs,CurrentSEFSs
Line Stat Alarm State
Path Stat Alarm State
LOCD Alarm State
APS
Cisco MGX 8850 Routing Switch Command Reference
9-52
: 1.1
: LOS
: Clear
: Clear
: TotalUASs,CurrentUASs
: TotalUASs,CurrentUASs
: Clear
Alarm State : N/A
: 1.1
: LOS
: Clear
: Clear
: CurrentSESs,CurrentUASs
: CurrentSESs,CurrentUASs
: Clear
Alarm State : N/A
Chapter 9 Troubleshooting Commands
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001