Dsprscprtns - Cisco MGX 8850 Command Reference Manual

Chapter 3 Equipment and Resource Provisioning

dsprscprtns

Display Resource Partitions
Display information for all the resource partitions on the current card. The displayed information is
shown in the example.
For information on specific elements of a resource partition, see the description of addrscprtn.
Note The dspparts and dsprscprtns commands are identical. The name 'dsprscprtn' is consistent with the
corresponding command in Release 1 of the MGX 8850 switch. You can use either command.
Cards on Which This Command Runs
AXSM
Syntax
dsprscprtns
Related Commands
addrscprtn, delrscprtn, cnfrscprtn, dsprscprtn
Attributes
Log: no log
Example
Display all resource partitions on the current card.
MGX8850.1.AXSM.a > dsprscprtns
if
Num ID
-----------------------------------------------------------------------------
1
2
20
21
22
23
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
State: active, standby
part Ctlr egr egr
ID GuarBw MaxBw
(.0001%)(.0001%)(.0001%)(.0001%)
1 2 1000000 1000000 1000000 1000000
1 2 1000000 1000000 1000000 1000000
1 2 1000000 1000000 1000000 1000000
1 2 1000000 1000000 1000000 1000000
1 2 1000000 1000000 1000000 1000000
1 2 1000000 1000000 1000000 1000000
Privilege: ANYUSER
ingr ingr min max
GuarBw MaxBw vpi vpi
0 4095
0 255
1 1
0 255
0 255
255 255
Cisco MGX 8850 Routing Switch Command Reference
dsprscprtns
min max min max
vci vci conn conn
33 65535 1000 32000
33 65535 1000 32000
33 65535 2 512
33 65535 2 512
33 65535 2 512
33 65535 2 512
3-97