Dsppnportcc - Cisco MGX 8850 Command Reference Manual

dsppnportcc

dsppnportcc
Display Port Call Control
This command lets you display the call control parameters for a logical port. See cnfpnportcc for a
description of applicable parameters.
Cards on Which This Command Runs
PXM45
Syntax
dsppnportcc <portid>
Syntax Description
portid
Related Commands
cnfpnportcc
Attributes
Log: log
Examples
Display the call control configuration for port 3:1.1:1.
8850_NY.8.PXM.a > dsppnportcc 3:1.1:1
maxP2mpRoot:
maxP2mpLeaf:
svc blocking option:
spvc blocking option:
8850_NY.8.PXM.a >
Cisco MGX 8850 Routing Switch Command Reference
6-90
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also PNNI Format, page
State: active, standby
1000
4095
no
no
Chapter 6
6-4.
Privilege: ANYUSER
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Logical Node, Port, and Signaling Commands