Dsprteoptstat - Cisco MGX 8850 Command Reference Manual

dsprteoptstat

dsprteoptstat
Display Route Optimization Status
Display the current percent of route cost reduction. This percent is a threshold that the PXM45 requires
to determine that one route costs sufficiently less to warrant re-routing. The percent applies to all
connections on the node. The system default is 30%, but you can configure a percent through the
cnfrteoptthld command. For more details on route optimization, see the cnfrteopt description.
Cards on Which Command Executes
PXM45
Syntax
dsprteoptstat
Syntax Description
This command takes no parameters.
Related Commands
cnfrteopt, cnfrteoptthld, optrte, dsprteoptstat
Attributes
Log: no log
Example
Display the current route optimization status for the switch. The display shows the default optimization
of 30%.
pop20two.7.PXM.a > dsprteoptstat
Configuration of Route Optimization:
Percentage Reduction Threshold: 30
Cisco MGX 8850 Routing Switch Command Reference
8-18
State: active, standby Privilege: ANYUSER
Chapter 8 Network Optimization Commands
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001