Dsppnni-Dbg - Cisco MGX 8850 Command Reference Manual

Chapter 5 PNNI Commands
node reachability
address
itdb
ra
cp
link selection
Related Commands
dbgpnni
Attributes
Log: nolog
Example
Display the active PNNI debug options.
Unknown.1.1.PXM45.a > dsppnni-dbg
pnni debugging option:
hello election nbr itf timer lgn spt
----- -------- --- --- ----- --- ---
off
address
-------
off
Geneva.7.PXM.a >
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Display the flag that indicates whether the node reachability debug is enabled.
on: the node reachability debug is enabled.
off: the node reachability debug is disabled.
Display the flag that indicates whether the addressing debug is enabled.
on: the addressing debug is enabled.
off: the addressing debug is disabled.
Display the flag that indicates whether the internal data base debug is enabled.
on: the internal data base debug is enabled.
off: the internal data base debug is disabled.
Display the flag that indicates whether the route agent debug is enabled.
on: the route agent debug is enabled.
off: the route agent debug is disabled.
Display the flag that indicates whether the CP debug is enabled.
on: the CP debug is enabled.
off: the CP debug is disabled.
Display the flag that indicates whether the link selection debug is enabled.
on: the link selection debug is enabled.
off: the link selection debug is disabled.
State: active
off off off off
itdb ra cp
---- --- ---
off off off
Privilege: CISCO_GP
node reachability
-----------------
off off off
link selection
--------------
off
Cisco MGX 8850 Routing Switch Command Reference

dsppnni-dbg

5-59