Dspatmln - Cisco MGX 8850 Command Reference Manual

dspatmln

dspatmln
Display ATM Line
Displays the cell header configuration for the line that was set using cnfatmln. The display indicates
NNI or UNI cell headers.
Cards on Which This Command Runs
AXSM
Syntax
dspatmln <bay
Syntax Description
bay.line
Related Commands
cnfatmln, clratmlncnt
Attributes
Log: no log
Example
Display the line configuration for line 1 of the AXSM-1-2448.
MGX8850.1.AXSM.a > dspatmln 1.1
line
----------------------------------------------------------------------
1.1
Cisco MGX 8850 Routing Switch Command Reference
3-52
.line
>
Identifies the bay (1 or 2) and the number of the line. The line number is from 1 to the
highest numbered line on the back card. For the range of line numbers on specific
AXSM models, see Table
State: active, standby
HCScoset PayloadScramble NullCellHdr NullCellPayload
Enable Enable
Chapter 3
3-1.
Privilege: ANYUSER
1a1a1a1a aa
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Equipment and Resource Provisioning