Cisco MGX 8850 Command Reference Manual page 696

dspchantests
Examples
Run tstdelay on connection 1 10 100 then display the results.
Execute tstdelay:
Step 1
node19.1.AXSM.a > tstdelay 1 10 100
Test started; Use dspcon/dspchantests to see test results
Step 2 Check the results:
node19.1.AXSM.a > dspchantests 1 10 100
Connection Id
=============
01.0010.00100:
Run tstconseg for 1 10 100 then display the results.
Run the test for 1 10 100:
Step 1
node19.1.AXSM.a > tstconseg 1 10 100
Test started; Use dspcon/dspchantests to see test results
Check the results:
Step 2
node19.1.AXSM.a > dspchantests 1 10 100
Connection Id
=============
01.0010.00100:
Cisco MGX 8850 Routing Switch Command Reference
9-78
Test Type Direction
========= =========
OAM Lpbk ingress
Test Type Direction
========= =========
OAM Lpbk egress
Chapter 9
Result Round Trip Delay
======= ================
Success 40000
Result Round Trip Delay
======= ================
TimeOut 0
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Troubleshooting Commands