Logical Node, Port, and Signaling Commands
This chapter describes primarily the PNNI commands that apply to PNNI ports. It also contains some
node-level commands, such as a variety of commands that relate to node-level congestion thresholds. In
general, the commands let you create, delete, display logical elements, and view and clear statistics. The
commands pertain to the following areas of PNNI port function:
•
•
•
•
•
•
•
•
•
•
•
•
Types of Address
Three types of local addresses exist:
•
•
•
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Address assignment
Address filtering
Address ping
Signalling
Control Channels
Defaults for bandwidth parameters
Connection-related commands—either or both SVCs and SPVCs
Port resource commands
IISP interfaces
ILMI Port Management
SSCOP (service-specific connection-oriented protocol)
Congestion thresholds for the node and for individual ports
ILMI-registered addresses
User-provisioned addresses via addaddr
Host application addresses, such as AESA-Ping, PNNI logical group numbers, IP connectivity,
node-level SPVC prefix, and so on
C H A P T E R
Cisco MGX 8850 Routing Switch Command Reference
6
6-1