Cisco MGX 8850 Command Reference Manual page 41

Chapter 1 Command Line Interface Overview
cd
Change Directory
Use cd to change to another directory on the PXM45 hard disk.
Cards on Which This Command Runs
PXM45
Syntax
cd <directory_name>
Syntax Description
directory_name
Related Commands
ls, pwd, rename, rm/rmdir, copy
Attributes
Log: log
Change directory to FW, then check the result by executing pwd.
MGX8850.7.PXM.a > cd FW
MGX8850.7.PXM.a >
Verify the current directory by using the pwd command.
MGX8850.7.PXM.a > pwd
C:FW
Go back to Root directory, then check the result by executing pwd.
MGX8850.7.PXM.a > cd ..
MGX8850.7.PXM.a > pwd
C:
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Name of the destination directory.
State: active, standby, init Privilege: ANYUSE
Cisco MGX 8850 Routing Switch Command Reference
cd
1-11