Cisco MGX 8850 Command Reference Manual page 249

Chapter 3 Equipment and Resource Provisioning
Display the Class of Service Buffer parameters for SCT 2 Note the following:
•
•
•
Cell loss ratio (CLR) is currently hard-coded, so do not attempt tot modify it through the Cisco WAN
Manager application or the CLI commands.
MGX8850.1.AXSM.a > dspportsct cosb 2
+-----------------------------------------------------------------------------------+
|Service Class Template [02] : COSB Parameters
+-----------------------------------------------------------------------------------+
| COSB | MIN-RATE | MAX-RATE | MIN-PRIORITY | EXCESS-PRIORITY | ERS ENABLE |
+-----------------------------------------------------------------------------------+
| 0001 | 00000000 | 00000100 |
| 0002 | 00000000 | 00000100 |
| 0003 | 00000000 | 00000100 |
| 0004 | 00000000 | 00000100 |
| 0005 | 00000000 | 00000100 |
| 0006 | 00000000 | 00000100 |
| 0007 | 00000000 | 00000100 |
| 0008 | 00000000 | 00000100 |
| 0009 | 00000000 | 00000100 |
| 0010 | 00000000 | 00000100 |
| 0011 | 00000000 | 00000100 |
| 0012 | 00000000 | 00000100 |
| 0013 | 00000000 | 00000100 |
| 0014 | 00000000 | 00000100 |
| 0015 | 00000000 | 00000100 |
| 0016 | 00000000 | 00000100 |
+-----------------------------------------------------------------------------------+
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Min-Rate and Max-Rate do not apply in the current product.
Excess-Priority is a scheme for distributing excess bandwidth. The lowest number is the highest
priority for a connection to receive excess bandwidth. If two or more connections have equal
priority, the excess bandwidth is equally distributed between them.
Explicit Rate Stamping (ERS) applies to only ABR connections.
000 |
000 |
000 |
000 |
000 |
000 |
000 |
000 |
000 |
000 |
000 |
000 |
000 |
000 |
000 |
000 |
CLR
002 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
000 | DISABLE | 10^-10 |
001 | DISABLE | 10^-08 |
001 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
002 | DISABLE | 10^-06 |
000 | DISABLE | 10^-06 |
Cisco MGX 8850 Routing Switch Command Reference
dspportsct
|
3-89