Dbgcon - Cisco MGX 8850 Command Reference Manual

Chapter 9 Troubleshooting Commands

dbgcon

Debug Connection—enables or disables logging of SPVC-related errors.
Enable or disable the SPVC log.To see whether the SPVC log is enabled, use dspcons-dbg.
Cards on Which This Command Runs
PXM45
Syntax
dbgcon
<enable | disable>
Syntax Description
enable | disable
Related Commands
dspcons-dbg
Attributes
Log: no log
Example
Enable the SPVC log.
MGX8850.8.PXM.a > dbgcon enable
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Enable or disable the SPVC log. Type the entire word. The default is disabled.
State: active, standby Privilege: SERVICE_GP
Cisco MGX 8850 Routing Switch Command Reference
dbgcon
9-45