Cisco MGX 8850 Command Reference Manual page 464

cnfsig
-t310
-t316
-t317
-t322
-t397
-t398
-t399
-maxcrbk
Related Commands
dspsig
Attributes
Log: log
Cisco MGX 8850 Routing Switch Command Reference
6-46
The T310 timer.
Range:
10–20 seconds for UNI.
•
30–120 seconds for PNNI. The range you can specify for PNNI is 30–120. If you
•
do not specify a T310 timer value for PNNI, it remains the default of 10 seconds
for PNNI.
Default: 10
The t316-timer: Set the T316 timer.
Range: 90–300 seconds
Default: 90
The t317-timer: Set the T317 timer.
Range: 60–300 seconds
Default: 60
The t322-timer: Set the T322 timer.
4–20 seconds.
Default: 4
The t397-timer: Set the T397 timer.
Range: 180–240 seconds
Default: 180
The t398-timer: Set the T398 timer.
Range: 4–20 seconds
Default: 4
The t399-timer: Set the T399 timer.
Range: 14–28 seconds for UNI 3.0 and 3.1.
Default: 14.
The maximum number of crankback attempts allowed on the port.
Range: 0–10
Default: 3
State: active Privilege: SUPER_GP
Chapter 6 Logical Node, Port, and Signaling Commands
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001