Cisco MGX 8850 Command Reference Manual page 557

Chapter 7 SPVC and SVC Commands
-trm
-adtf
-cdf
-fsd
Related Commands
addcon, cnfabr, dspabrtparmdft
Attributes
Log: no log
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Keyword that specifies the maximum number of milliseconds for one RM-cell to travel
from source to endpoint. The range is 100 x 2
Keyword that specifies the ACR Decrease Time Factor (ADTF). This is the time
permitted to decrease the cell rate from the RM-cell rate to the Allowed Cell Rate
(ACR) for normal traffic. The range is 1 to 1023 milliseconds.
Keyword that specifies the Cutoff Decrease Factor (CDF). This controls the decrease
in Allowed Cell Rate (ACR) associated with Missing RM-cell count (CRM). CDF can
be either or the following:
• Zero
• A power of 2 in the range 1/64 to 1
CRM limits the number of forward RM-cells that may be sent in the absence of
received backward RM-cells. CRM is an integer. Its size is implementation-specific.
Keyword that specifies the Fixed-source-delay (default = 0).
State: active
-7 0
to 100 x 2 milliseconds.
Privilege: GROUP1
Cisco MGX 8850 Routing Switch Command Reference
cnfabrtparmdft
7-21