Cisco MGX 8850 Command Reference Manual page 475

Chapter 6 Logical Node, Port, and Signaling Commands
Related Commands
addaddr, dspaddr
Attributes
Log: log
Example
On port 11:2.8:22, delete 47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.8000.00. Note that the
command entry includes the address length of 160 after the address.
Geneva.7.PXM.a > deladdr 11:2.8:28 47.0091.8100.0000.0000.0ca7.9e01.4000.0c81.8000.00 160
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
State: active Privilege: GROUP1
Cisco MGX 8850 Routing Switch Command Reference
deladdr
6-57